 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micrel, Inc. QUINT DIFFERENTIAL LINE RECEIVER SY10E416 SY100E416 SY10E416 SY100E416 FEATURES s Differential D and Q s Extended 100E VEE range of -4.2V to -5.5V s s s s s s s VBB output for single-ended use 600ps max. propagation delay High frequency outputs 2 stages of gain Internal 75K input pull-down resistors Fully compatible with Motorola 10E/100E416 Available in 28-pin PLCC package DESCRIPTION The SY10/100E416 are 5-bit differential line receiving devices. The 2.0GHz of bandwidth provided by the high frequency outputs make the devices ideal for buffering of very high speed oscillators. A VBB pin is available to AC couple an input signal to the devices. The design incorporates two stages of gain internal to the devices, making them an excellent choice for use in high bandwidth amplifier applications. BLOCK DIAGRAM D0 D0 D1 D0 D2 D2 D3 D3 D4 D4 VBB Q0 Q0 Q1 Q1 Q2 Q2 Q3 Q3 Q4 Q4 PIN NAMES Pin D[0:4], D[0:4] Q[0:4], Q[0:4] VCCO Function Differential Data Inputs Differential Data Outputs VCC to Output M9999-032206 hbwhelp@micrel.com or (408) 955-1690 Rev.: F Amendment: /0 1 Issue Date: March 2006 Micrel, Inc. SY10E416 SY100E416 PACKAGE/ORDERING INFORMATION D4 D4 VCCO Q4 Q4 VCCO D3 Ordering Information(1) Part Number 18 17 25 24 23 22 21 20 19 Package Type J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 Operating Range Industrial Industrial Industrial Industrial Commercial Commercial Commercial Commercial Industiral Industrial Industrial Industrial Package Marking SY10E416JI SY10E416JI SY100E416JI SY100E416JI SY10E416JC SY10E416JC SY100E416JC SY100E416JC SY10E416JY with Pb-Free bar-line indicator SY10E416JY with Pb-Free bar-line indicator SY100E416JY with Pb-Free bar-line indicator SY100E416JY with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Matte-Sn Matte-Sn Matte-Sn Matte-Sn D3 D2 D2 VEE VBB D0 D0 26 27 28 1 2 3 4 5 6 7 8 9 10 11 Q3 Q3 VCC Q2 Q2 VCCO Q1 SY10E416JI SY10E416JITR(2) SY100E416JI SY100E416JITR(2) SY10E416JC SY10E416JCTR(2) SY100E416JC SY100E416JCTR(2) SY10E416JY(3) TOP VIEW PLCC J28-1 16 15 14 13 12 D1 VCCO Q0 Q0 28-Pin PLCC (J28-1) VCCO Q1 D1 SY10E416JYTR(2, 3) SY100E416JY(3) SY100E416JYTR(2, 3) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032206 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10E416 SY100E416 DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol VBB Parameter Output Reference Voltage 10E 100E Input HIGH Current Power Supply Current 10E 100E VPP (DC) VCMR Input Sensitivity Common Mode Range -- -- 50 -1.5 135 135 -- -- 162 162 -- 0 -- -- 50 -1.5 135 135 -- -- 162 162 -- 0 -- -- 50 -1.5 135 155 -- -- 162 186 -- 0 mV V 1 2 Min. -1.38 -1.38 -- Typ. -- -- -- Max. TA = +25C Min. Typ. -- -- -- Max. TA = +85C Min. Typ. Max. -- -- -- -1.19 -1.26 150 A mA -- -- Unit V -1.27 -1.35 -1.26 -1.38 150 -- -1.25 -1.31 -1.26 -1.38 150 -- Condition -- IIH IEE Notes: 1. Differential input voltage required to obtain a full ECL swing on the outputs. 2. VCMR is referenced to the most positive side of the differential input signal. Normal operation is obtained when the input signals are within the VCMR range and the input swing is greater than VPP (min.) and <1V. AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol tPD Parameter Propagation Delay to Output D (Diff) D (SE) Within-Device Skew Duty Cycle Skew, tPLH-tPHL Minimum Input Swing Rise/Fall Time 20-80% 150 100 Min. 250 200 -- Typ. 350 350 50 10 -- 200 -- 350 150 100 Max. 500 550 -- TA = +25C Min. 250 200 -- Typ. 350 350 50 10 -- 200 -- 350 150 100 Max. 500 550 -- TA = +85C Min. Typ. 250 200 -- 350 350 50 10 -- 200 -- 350 Max. Unit ps 500 550 -- ps ps mV ps 1 2 3 -- Condition -- tskew tskew VPP (AC) tr tf Notes: 1. Within-device skew is defined as identical transitions on similar paths through a device. 2. Duty cycle skew defined only for differential operation when the delays are measured from the cross point of the inputs to the cross point of the outputs. 3. Minimum input swing for which AC parameters are guaranteed. M9999-032206 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10E416 SY100E416 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-032206 hbwhelp@micrel.com or (408) 955-1690 4 |
Price & Availability of SY10E416JI
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |